Welltec TTI-450FT-SE (2013)

Welltech TTI-450FT-SE (2013) Servo Driven Plastic Injection Moulding Machine

Welltec TTI-450FT-SE (2013) Multi-Material

Servo Driven Plastic Injection Moulding Machine

Brand New Condition

Model: TTI-450FT-SE

Year : 2013

Screw diameter : 70mm (main) ; 35mm (sub)

Theoretical shot volume : 1416cm3 ; 231cm3

Theoretical shot weight (PP): 1020g ; 166g

Injection pressure : 221MPa ; 181MPa

Injection speed : 150mm/sec

Clamping force: 450-ton

Distance between tie bars : 780x780mm

Min. mould dimensions : 540x540mm

Max. mould thickness range : 600~1120mm

Electric voltage : 380v ; 50hz

The machine comes with following preinsltalled options :

  1. Plasticising with Servo-motor pump for parallel motion (upgrade to four servo-motors)
  2. Two Herzog pneumatic shut-off nozzles for plasticizing when parallel motion.
  3. TAI-Star 70mm & 35mm nitrided Screw, Screw-tip, End Cap and Barrel for molding Homo-PP 12-24 MF
  4. Semi-Closed Loop Clamp open/close
  5. Proportional backpressure. (Both main and side unit)
  6. Three air blasts. (Two for air ejection, one for valve gate control.)
  7. High pressure grease lubrication pump
  8. Euromap 67 Robot interface.
  9. B&R PP400 Controller with additional I/O port for parallel motion and additional option control.
  10. Moving platens mounted on linear rails (Rails from Rexroth)
  11. Enhanced Machine's Chassis and structure for guarantee platen parallelism
  12. Main and side barrel with ceramic heater full set.
  13. Redesign and build the power cabinet for optional items.

The machien is in very good working condition. Please contact us for more details and price. 

Welltec TTI-450FT-SE (2013) Servo-Driven Multi Material Plastic Injection Moulding MachineWelltec TTI-450FT-SE (2013) Servo-Driven Multi Material Plastic Injection Moulding MachineWelltec TTI-450FT-SE (2013) Servo-Driven Multi Material Plastic Injection Moulding MachineWelltec TTI-450FT-SE (2013) Servo-Driven Multi Material Plastic Injection Moulding MachineWelltec TTI-450FT-SE (2013) Servo-Driven Multi Material Plastic Injection Moulding MachineWelltec TTI-450FT-SE (2013) Servo-Driven Multi Material Plastic Injection Moulding Machine

 

 

Sell Your Equipments

We buy and sell used plastic injection moulding machines ranging from small to ultra-large electric as well as hydraulic. Esta Tech works with manufacturers who are looking to sell their excess injection molding equipment by listing their equipment and machines in our inventory and locates qualified buyers.

Read more

Gallery

JSW J650ELIII Clamping UnitJSW J650ELIII Clamping UnitJSW J650ELIII Injection UnitJSW J450ELIII Injection Molding Machine

Subscribe